Download And Install TWRP & Root European LG V10 H960A

Download And Install TWRP & Root European LG V10 H960A

Hello Friends, Today i am going to tell you Download And Install TWRP & Root European LG V10 H960A. This is the best way To Download And Install TWRP & Root European LG V10 H960A. So you can check Download And Install TWRP & Root European LG V10 H960A Below Here. Finally, there is an unofficial build of TWRP recovery 3.0.2-0  for the LG V10 H960A is out.That means now you can install TWRP recovery on your LG V10 H960A.Thanks, to user rudi666 over at Xda for sharing the latest TWRP recovery and SuperSU root file.First, you have to install the TWRP recovery via Fastboot then you can install the SuperSu root package using TWRP recovery to get root access on European LG V10 H960A

Make sure you have a PC.You have to install the ADB & Fastboot on your computer so that you can install the latest TWRP recovery on your LG V10 H960A using Fastboot commands.As you guys know LG officially supports unlocking bootloader.Follow the given steps to Install TWRP On LG V10 H960A using fastboot commands

PRE-REQUIREMENTS
Make sure your device has more than 50% battery
Setup ADB & fastboot On Your Computer (Windows)
First download LG USB drivers on your computer, then enable USB debugging on your LG V10 smartphone, go to settings >> developers option. If developer’s option isn’t visible on your galaxy device, simply go about phone under settings and scroll down to build number, then tap build number up to 7 times to make developers option visible.
Unlock the bootloader of LG V10.Guide > How To Unlock Bootloader on LG V10

DOWNLOAD
TWRP 3.0.2-0 For LG V10 H960A  >  Dev link | Download Mirror (14.9MB)

 SuperSU (download the latest One)

HOW TO INSTALL TWRP & ROOT EUROPEAN LG V10 H960A
First, read the Pre-requirements section carefully
Now download the TWRP file and put it in the ADB & Fastboot folder
Follow the guide to  Install TWRP On European LG V10 H960A  How to Install TWRP Recovery via Fastboot On Any Android Device
Once the TWRP is installed, reboot the phone
Download the latest SuperSu root file from the download section above and transfer it to the internal memory of your device

Now boot your device into recovery mode
Boot LG V10 into recovery:
Switch off your LG V10.
Now Hold Power and Volume Down button together and soon as you see the LG logo, release the buttons for a moment and then press hold both the buttons again until you see the TWRP recovery screen. 
Now Follow the guide to flash the SuperSu root file via TWRP recovery to Root European LG V10 H960A.Guide  How To Flash SuperSU using TWRP Recovery & Root Any Android device
Done!!Your LG V10 H960A is now rooted
If you have any question related to this post, feel free to leave that in the comment section.