How to root Sony Xperia M4 Aqua E2353 and install TWRP Recovery

How to root Sony Xperia M4 Aqua E2353 and install TWRP Recovery

Hello Friends, Today i am going to tell you How to root Sony Xperia M4 Aqua E2353 and install TWRP Recovery. This is the best way to root Sony Xperia M4 Aqua E2353 and install TWRP Recovery. So you can check How to root Sony Xperia M4 Aqua E2353 and install TWRP Recovery Below Here. The Xperia M4 Aqua is a decent Android based device that offers mid range (to high end) performances. However, if you are a picky customer or a user who wants to test the latest games and apps from the market, then you might find the M4 a little bit too slow. In that respect, you should know that your device can perform better, but only if you agree to make some changes. Yes, I am talking about some tweaking procedures which can unleash the full potential of your smartphone.
Therefore, if you would like to improve the performances of your Sony Xperia M4 Aqua I recommend you to read all the guidelines from below. During the same lines I will show you how to start this tweaking process by completing two different operations: installing a custom recovery image (TWRP recovery) and ensuring root access. Both operations will prepare your Xperia M4 Aqua for further customization and optimization procedures, so starting from now you can start considering in taking your Android device to a higher level of performance.
First, will teach you how to flash the custom recovery image as the same software will be then used on the root process. Do note that the operations from below are complex and also risky, so you should apply them only if you are an advanced Android user or if you are used with tweaking procedures – don’t worry, if you apply all the steps from below and if you read all the lines from this guide, you will be safe and secured.
However, keep in mind that installing a custom recovery image and gaining root access are both unofficial operations, which shouldn’t be related with Google or with Sony. So, as an overall conclusion, after completing this tutorial, you will lose your Xperia M4 Aqua warranty – if your phone will get bricked, starting from now taking your device back to service will imply in paying for the technical assistance (that’s why it is important to learn how to manually deal with Android software related issues).
TWRP is a dedicated custom recovery software that is now optimized for your Sony Xperia M4 Aqua. This software should be installed if you want to gain more control towards the Android system that powers your phone. Through TWRP recovery you will be able to perform various operations that can’t be usually performed through the stock recovery that comes pre installed on your smartphone (by default you can only apply OTAs, clear app data cache, make a hard reset and perform other official maintenance procedures). The best however is that root access can be now ensured through this custom recovery image.
Now, root access will remove all the factory and default restrictions from your Sony Xperia M4 Aqua. It is important to do that as if your access is restricted you can’t customize and optimize anything. Once root access will be applied you will be able to bump speeds, upgrade the battery life and improve all the other general performances. Everything will be possible because you will be able to overclock or undervolt CPU frequencies, install custom kernels, remove bloatware, install custom ROMs like CyanogenMod, AOKP or ParanoidAndroid, add apps from outside the Google Play coverage and lot more.
Good; so now you know why you should complete this guide and you also know the risks that are related to these procedures. Do note that once root access is enabled you won’t be able to receive further OTAs on your Xperia M4 Aqua. Don’t get it wrong, you can still apply stock updates, but only manually – the OTA notifications can’t be spotted on rooted systems.
Since installing TWRP recovery and gaining root access are complex procedures, before doing anything else you should make a Nandroid and a general backup. The Nandroid backup will save the current ROM that runs on your M4 Aqua, while the general backup will take care of your personal data, info and accounts – in this way you can be sure that nothing bad happens while you try to tweak your Android device.
Through the general backup you should save your contacts, call logs and text messages along with your market apps, internet settings, IME / NVRAM data, calendar info, images, videos, audio files and anything else you might need afterwards. Don’t worry, everything can be saved easily by using cloud storage platforms, a computer, a SD card or other backup and restore apps from Google Play.
Other pre requisites: a computer is required as you have to download and install some tools on the same: learn how to install Android SDK on Windows or how to set up ADB on MAC OS X / Linux; make sure that the M4 Aqua drivers are installed on your PC; temporarily turn off security options from your computer as antivirus tools can interfere with the download / installation operations that must be completed; on your Xperia M4 Aqua enable Developer Options by taping several times on Built Number and then check the USB debugging feature by accessing “menu – settings – developer options”.
Don’t go any further without previously checking the battery life on your Sony Xperia M4 Aqua – if your phone gets turned off while you try to gain root access or while TWRP recovery is being installed, a soft brick might be issued. So, avoid unpleasant situations from taking place and plug in the charger if the power left is currently lower than 50%.
This tutorial works with the following models of the Sony Xperia M4 Aqua: E2303, E2306, E2333, E2353, E2363.Thus, don’t use the lines from below in case you own a different or a similar Android based device.

REQUIREMENTS
You need to have a computer that is running on a version of the Windows operating system to be able to flash the custom recovery image to your Sony Xperia M4 Aqua smartphone. The reason being we are installing ADB for Windows only. There are other versions of ADB available out there on the web for other operating systems like Mac and Linux run, but they require unique commands and unique files. Mac users can use the same commands as below but just add an “./” in front of the commands to get them to work.
You need to have the Sony Xperia M4 Aqua bootloader unlocked before you can follow this guide to install the custom recovery image.

BEFORE WE BEGIN
You need to have the Developer options menu already unlocked on the Sony Xperia M4 Aqua smartphone, and the USB debugging mode enabled from that Developer Options menu. That is the step that is going to allow for us to change the Android software from what it is at the moment.
We recommend that you install the Universal Windows ADB Driver on the Windows computer before getting also started so that your ADB commands work.

HOW TO INSTALL TWRP RECOVERY ON SONY XPERIA M4 AQUA E2353
Download the TWRP Recovery for the Sony Xperia M4 Aqua E2353 directly on the computer.
Download the boot image for the smartphone that is required to get the root access.
Learn how to set up ADB on Microsoft’s Windows operating system if you have not got ADB installed already on the computer.
Open the Downloads folder to find your TWRP file and copy it to the ADB folder so both the custom recovery and ADB are within the same directory.
Extract the TWRP file in the ADB folder so all the contents of the TWRP zipped file is available.
Do the same thing for the boot image as you did for the custom recovery, so all three are in the same folder.
Connect the Sony Xperia M4 Aqua E2353 smartphone to the computer with the USB cable.
From inside the ADB and TWRP folder, hold down the Shift key and right-click the white background where there are no files in the way and then chose to open a command window here from the menu.
Type the command: “adb reboot bootloader” to get your Xperia M4 Aqua into the bootloader mode and ready for the custom recovery flashing.
Type the command: “fastboot flash recovery recovery.img” and the custom recovery you wanted to install gets flashed.
Type the command: “fastboot reboot” and wait for the smartphone to shut down.
Restart the smartphone and get ready to type some more fastboot commands from the command line.
Type the command: “fastboot flash boot boot.img” to get the boot image flashed.
Type the command: “fastboot reboot” and your Sony Xperia M4 Aqua smartphone is now rooted and has the custom recovery installed.
In conclusion, that is everything you need to get TWRP Recovery and then root the Sony Xperia M4 Aqua E2353 smartphones by using ADB on a computer.

Hope you like my post. My website daily update. So bookmark my site and stay updated. You can also follow my page below here. And thanks for visit my site.

Follow us on FaceBook- Click Here

Follow us on Twitter- Click Here

Follow us on Pinterest- Click Here

Follow us on Tumblr- Click Here

Follow us on Google Plus- Click Here