Download and Install OxygenOS 4.1.6 for OnePlus 3 and OnePlus 3T

Download and Install OxygenOS 4.1.6 for OnePlus 3 and OnePlus 3T

OnePlus recently announced that the latest update, OxygenOS 4.1.5 for OnePlus 3 and OnePlus 3T is currently rolling out, meaning that even though they’re getting ready to launch a new model, the older handsets won’t be ignored at all. The update brings quite a few improvements to the handset, but it should take a while until all users will get it, since it’s rolling out over the air. On the other side, if you don’t want to wait until you receive the update, since it’s being distributed in a phase-wise manner, you can also install OxygenOS 4.1.5 on OnePlus 3/3T, by simply following the instructions available in the guide below. Before starts downloading and installing the OxygenOS 4.1.6 update manually on your OnePlus 3 or OnePlus 3T, check out the highlights of OxygenOS 4.1.6 update. The firmware is still based on Android 7.1.1 Nougat and it includes various updates, bug fixes, optimizations and additions. In addition, the update includes latest Android security patches (May 1, 2017).

What’s new with Oxygen OS 4.1.6 – changelog

New additions:
• Added system push notifications for important information from OnePlus
Updates:
• Updated network settings for select carriers
• Updated OnePlus Community app to v1.8
• Updated Android Security Patch level to 1st May 2017
• Modified WiFi no internet indication icon
Bug fixes:
• Fixed storage issue present on 3rd party file managers
• Fixed VoLTE issue on certain Jio SIM cards
• Fixed connection issue on Android Auto
Optimizations:
• Battery
• WiFi, Bluetooth, and GPS
• Proximity sensor
• Camera low light focus
• Expanded screenshot
Other changes:
• Enhanced system stability

Also Read:-
 Download and Install OxygenOS 4.1.3 for OnePlus 3 and OnePlus 3T 
 Download and Install OxygenOS 4.1.4 for OnePlus 3T and OnePlus 3 

Preparation Before Begin
1. This ROM is work on OnePlus 3 and OnePlus 3T. Don’t try this on any other device
2. Before do all thing , developer Option menu must be unlocked and USB Debugging mode enabled from developer option.
3. Before you doing these steps , you have to unblock your bootloader your device.
4. You have to back up your android phone, before doing this. It will erase your all data, contacts, and apps
5. Your device must have 60% battery before do all these thing.
6. Follow my all thing step by step. Otherwise your device may brick. Gsmarena24.blogspot.com are not responsible for this.
7. Download USB driver for Your Device.

Download OxygenOS 4.1.6 for OnePlus 3 and OnePlus 3T
OxygenOS 4.1.6 update for OnePlus 3 OTA link – DownloadMirrorMega (OxygenOS 4.1.5 to OxygenOS 4.1.6)
OxygenOS 4.1.6 Full ROM for OnePlus 3 – DownloadMirrorMega
OxygenOS 4.1.6 OTA for OnePlus 3T – DownloadMirrorMega (OxygenOS 4.1.5 to OxygenOS 4.1.6)
OxygenOS 4.1.6 Full ROM for OnePlus 3T – DownloadMirrorMega

How to Install OxygenOS 4.1.6 Update on OnePlus 3 and OnePlus 3T

Method 1

Step 1: You need to enable the phone’s USB Debugging option. Go to Settings > About phone > Build number and tap it 7 times. This will enable the Developer Options menu, where you can find USB Debugging.

Step 2: Download the ADB and fastboot driver – Download and install it on your PC.

Step 3: Download the OxygenOS 4.1.5 ROM For OnePlus 3/3T, then copy it in the same folder where ADB is installed.

Step 4: Turn off the phone and boot it into Recovery Mode.

Step 5: From here, choose the Install from ADB Sideload option.

Step 6: Connect the device to a PC.

Step 7: While in the ADB folder, press shift and right click, so you can open a command.

Step 8: Type adb devices, in order to check your connectivity. If the phone is listed, you can flash the ROM.

Step 9: Type adb sideload File Name.zip to start the flashing process.

Step 10: Wait for around 10 minutes, until the flashing is completed.

Step 11: Reboot the phone.

Also Read:-

Method 2

Step 1: Download the OxygenOS 4.1.5 OTA .zip file from above and save it on your phone.

Step 2: Turn it off, then boot into Recovery mode, by holding Power + Volume Down.

Step 3: Select Apply Update, then ‘Choose from Internal Storage’.

Step 4: Look for the OTA .zip file which you’ve downloaded earlier.

Step 5: Select the file. This will start installing OxygenOS 4.1.5 on your phone.

Step 6: Wait until the process is ready. It will take around 10 minutes.

Step 7: Reboot your phone.

That’s all this is the complete guide to Download OxygenOS 4.1.6 for OnePlus 3 and OnePlus 3T (OTA + Full ROM). Have any questions? Do let us know that in the comments below.

Source – OnePlus
Download and Install OxygenOS 4.1.6 for OnePlus 3 and OnePlus 3T Download and Install OxygenOS 4.1.6 for OnePlus 3 and OnePlus 3T Reviewed by Rakesh on June 12, 2017 Rating: 5

No comments

Related Posts No. (ex: 9)