How to unbrick LG G2 with stock firmware guide

How to unbrick LG G2 with stock firmware guide

Hello Friends, Today i am going to tell you How to unbrick LG G2 with stock firmware guide. This is the best way to unbrick LG G2 with stock firmware guide. So you can check How to unbrick LG G2 with stock firmware guide Below Here. Tweaking your LG G2 is easy but unfortunately it is not always safe. If for example you are using guides that haven’t been previously tested you can end up in messing things up and also in damaging or bricking your Android smartphone. So, then you will find yourself in a delicate situation as you will have to unbrick the LG G2 by yourself – you can’t take your phone to service since you have applied an unofficial procedure as the warranty has been void. Because of that I have decided to develop this dedicated tutorial which can easily teach you how to fix a damaged or bricked LG G2.
Now, during the guidelines from below you can find several ways that can be used for repairing your Android device. So read all the lines and see which procedure to apply in your case. You have it all detailed here so don’t hesitate and check it all out. Do note that in case your device is severe damaged and you cannot apply the steps from below for unbrick it, the only solution you can take is the one where you go with your LG G2 back to service for technical assistance – but let’s hope you don’t have to do so.
You can say you have a bricked LG G2 when your phone can’t be used in normal way. For example you notice that you device runs with lags, there are numerous bugs, the screen and the apps freezes constantly, the battery drain fast, your phone gets stuck in a boot loop, it always boot in recovery mode and so on. These problems might happen due to various reasons but in most of cases the users are experiencing issues after performing operations like gaining root access, unlocking the bootloader, updating with a custom ROM firmware, installing a custom recovery image, flashing a custom kernel, overclocking the device, removing bloatware or in built programs and so on.
All the mentioned procedures are unofficial ones and when performing the same the warranty of your LG G2 gets void – because the binary flash counter will be increased. Now, if you end up in damaging or bricking your Android smartphone, you shouldn’t panic as you can use different methods that can repair your device. The best methods are being explained during the guidelines from below, so you are in the right place.
Before completing the steps from the proper guide, if possible save the data that is there on the internal storage memory of your LG G2. By applying the unbrick method all of your data will be erased, so you will lose your personal info, data and accounts along with contacts list, call logs, market apps, internet settings and so on. The best will be to use dedicated apps from Google Play, but as mentioned before only if you can use your smartphone; else you should skip this procedure as there is nothing you can do.
At the same time, you need to make sure that you can use a computer, your Android device and its USB cable. Now, on your computer it is recommended to deactivate the security protection as the antivirus or antimalware tools might interfere with our work. Moreover, you should charge your phone before doing anything else – plug in the charger especially if there is less than 50% power left, else you can skip this step. Also, remember that the procedures from below are compatible only with the LG G2 and with no other Android device. Furthermore, the steps have been tested only on the mentioned device, so the same will not work on any other smartphone or tablet.

How to Reset LG G2
There are two ways in which we can perform reset on Lg G2, one is through hardware keys and one that includes inbuilt OS option. Let’s learn them both:

 1. Through Hardware Keys
Turn off the device completely.
Press and hold Volume Down and Power buttons together until you see LG’s logo on the screen.
Release the Power button keeping Volume button pressed and then press Power button once more to bring Factory reset over the screen and release the pressed button.
Press Power button to confirm and perform reset on LG G2 and all done!

Also see:

 How To Unroot / Unbrick Moto X Play 2015 Guide 

How to Install Stock Firmware On Moto G4 / G4 Plus 

 Safely Install TWRP Recovery On Samsung Devices via Odin  

Tap on menu icon on your phone.
Tap on Settings and head to ‘General’ and tap on “backup and factory reset”.
Then tap on Factory reset and perform it.
Outright, you’ve successfully performed reset on your device and it should be okay now. If you still think that issue is not resolved, then must try flashing the stock firmware to it. Keep reading and we’ll let you know how easily you can unbrick your Lg G2 and get it back to life.

Let’s process to flashing process.

Pre-requisites
This stock is developed for below listed models for LG G2 smart phone. So you must first check the model number of your device under, phone’s Settings->About->Model. You must choose the firmware according to your model number.

LG G2 D802
LG G2 D805 (Brazil, Mexico, Panama)
AT&T G2 D800
T-Mobile G2 D801
Sprint G2 LS980
Verizon G2 VS980
Korean LG G2 F320K,  F320L
Korean LG G2 (SKT) F320S
You need a windows based PC with internet connectivity to download the firmware, and flashing tool. Supported windows are, Windows XP, 7 and 8.

Downloads
→ Get the official stock firmware for your LG G2 model from below list. Remember, download the .tot/.kdz file. 

Download on the basis on carrier and country!

LG G2 D802 Firmwares: Click to Download
LG G2 D805 (Brazil, Mexico, Panama): Click to Download
AT&T LG G2 D800 – Click to Download
VERIZON LG G2 VS980 – Click to Download
T-Mobile G2 D801 Firmware: Click to Download
NEU/EUROPE OPEN – V10A: [Download]
DEU/GERMANY – V10E: [Download]
6TA/ITALY_OPEN_16G – V10A: [Download]
6NL/NETHERLANDS_OPEN_16G – V10F: [Download]
6WN/TAIWAN_OPEN_16G – V10C: [Download]
6FR/FRANCE_OPEN_16G – V10E: [Download]
SKT/SK TELECOM(KOREA) – V11K: [Download]

→ Get the B2CAppSetup.exe file from here, and install it on your PC. Most noteworthy, it is a LG Mobile Support Tool and helps LG devices to connect to PC appropriately.


→ Get the Flashing Tool from here (FlashTool.1.0.54.zip). Extract the file to your PC, under it you’ll get a file named “UpTestEX.exe“, remember it.

How to install Stock firmware on LG G2
Download the firmware on PC depending on your model number of your device.

Now turn off the device, and wait for 5-7 seconds.
Turn on the device into recovery mode by pressing and holding Volume Up Key and then plug the USB cable. Connect it to PC.
From extracted FlashTool.1.0.54 folder, Run the UpTestEx.exe file. A new program window will appear PC.
Once you launched the program, click on the “Select Type”, then pick the 3GQCT from the list.
Click on “Phone Mode”, then select the “DIAG” from the list.
Under “Select Kdz file”, find and locate the downloaded firmware file.
Under test with CSMG Client, click the Normal web upgrade test. Then you’ll see a new Read Phone Information test button.
Now click on Upgrade Start button, a new pop-up will appear which will ask you to select country & Language.
Select “Republic of Korea” as country and “English” as language to proceed.
Then press “OK” to proceed to installation process. Wait until the process gets completed. After it, your phone will boot up itself. Now you can unplug the device from PC.
Now your phone should be working fine. In case you see that it is getting stuck or not booting up, then you’ll need to perform reset on it. Just perform the reset on it using Hardware Keys, method is already mentioned in this guide.

Now your phone will boot up to home screen. Then enter your Google Accounts information and start using it.

So that’s how we can repair our dead and bricked LG G2 device. However, in case of hardware damage, this method won’t be working and therefore you will need carry your device to nearest service center.

Hope you like my post. My website daily update. So bookmark my site and stay updated. You can also follow my page below here. And thanks for visit my site.
Follow us on FaceBook- Click Here
Follow us on Twitter- Click Here
Follow us on Pinterest- Click Here
Follow us on Tumblr- Click Here
Follow us on Google Plus- Click Here


How to unbrick LG G2 with stock firmware guide How to unbrick LG G2 with stock firmware guide Reviewed by Johnson James on September 14, 2016 Rating: 5

Related Posts No. (ex: 9)