Download Stock Firmware of Moto E3 Power XT1706 (Fix Bootloop, Back To Stock, Unbrick)

Download Stock Firmware of Moto E3 Power XT1706

Hello Friends, Today i am going to tell you Download Stock Firmware of Moto E3 Power XT1706. This is the best way to Back to Stock od moto e3 power. So you can check how to unbrick moto e3 power and how to install stock firmwares on moto e3 power below here. If you want to restore the stock firmware of Moto E3 [XT1706], then you came at right place today we are going to tell you how to restore the stock firmware of Moto E3 .I tell you how to unbrick a soft brick Moto E3 Power by installing stock rom.
Motorola Moto E3 Power (XT1706) is a decent, low cost, dual SIM Android smartphone running on the Android Marshmallow. It sports a 5-inch display and Quad-core 1.0 GHz (Mediatek MT6735P) processor with 2GB RAM. The phone has an 8MP/5MP camera combo and offers 16GB of internal storage. And, it powered by a 3500 mAh battery.

Preparation Before Begin

1. This ROM is work on Moto E3 Power. Don’t try this on any other device

2. Before do all thing , developer Option menu must be unlocked and USB Debugging mode enabled from developer option.

3.Before you doing these steps , you hav to unblock ur bootloader your device.

4. You have to back up your android phone, before doing this. It will erase ur all data, contacts, and apps

5. Your device must have 60% battery before do all these thing.

6.  Follow my all thing step by step. Otherwise your device may brick. Gsmarena24.blogspot.com are not responsible for this.

7.  Download USB driver for Your Device.

Also Read:-
 How to Unlock Bootloader of Moto E3 Power 
 How to Root Moto E3 Power and Install TWRP Recovery 

Download Stock Firmware of Moto E3 Power –

TWRP Backup of Moto E3 Power ( Moto E3 Stock Firmware Files)

How to Flash Stock Firmware on Moto E3 Power –
1) First of all download the firmware zip file from above.

2) Now extract the zip file and copy the folder 2016-11-15–14-31-34_XT1706_S131_160905_ROW in BACKUPS folder in TWRP folder in the internal memory of your Moto E3 power (If don’t find the folder then create one and place the file there).

3) Now Boot your phone into TWRP recovery by pressing and holding Volume up and power button at a same time.

4) Now do a Factory Reset by Goto Wipe>Advanced Wipe>Select Wipe cache, Dalvik cache, System, and data and swipe to confirm it.

5) Now click on Restore and select the file to restore the system.

6) After installation, Reboot your device.

7) You have done! Your device is now running on stock firmware.

So Download Stock Firmware of Moto E3 Power for now, and we will also provide you the Official Stock Firmware for Moto E3 Power as soon as it’s available. Comment below if you have any related questions.


Via – XDA