How to root Galaxy Tab 3 8.0 SM-T310 on Android 4.4.2 Kitkat

How to root Galaxy Tab 3 8.0 SM-T310 on Android 4.4.2 Kitkat

Hello Friends, Today i am going to tell you How to root Galaxy Tab 3 8.0 SM-T310 on Android 4.4.2 Kitkat. This is the best way to root Galaxy Tab 3 8.0 SM-T310 on Android 4.4.2 Kitkat. So you can check How to root Galaxy Tab 3 8.0 SM-T310 on Android 4.4.2 Kitkat Below Here. The Galaxy tab 3 8.0 is the 3rd series of Samsung’s tab collection supporting a brilliant Exynos 4212 Dual-Core 1.5 GHz CPU, Mali 400 GPU, an 8” HD display with Dolby Surround sound. Android 4.4 KitKat is around the corner to reach out almost every worthy device and so it has made its way to the Galaxy Tab 3 8.0, we have already covered a guide on how to Install Android 4.4.2 KitKat Firmware on Galaxy Tab 3 8.0 SM-T310.

Having this latest Android version running on your tab, it could literally reach sky high with its new performance and enhancements. But, you could always do a lot more when you have your device rooted, doing so is pretty easy if you have the right instructions and we are here to do that for you. So today, we are going to guide you to Root Galaxy Tab 3 8.0 SM-T310 on KitKat 4.4.2 using Chainfire’s CF-Auto-Root method and flashing it using the famous Odin flashing tool.

Warning
Rooting voids your Tab’s warranty and trips the KNOX counter. DroidViews or any of its members do not encourage rooting, understand the risk and perform everything on your own will. We shall not be held responsible for any damage to your device.

REQUIREMENTS
You must have a computer that is running the Windows operating system to use this guide. Any other operating system cannot run the Odin flashing tool. Those who are stuck with Mac or Linux and cannot get a Windows computer can try running the Windows operating system from a Windows virtual machine. You can usually set up a virtual machine with a free trial that lasts long enough for you to complete something like rooting the Android operating system.
You must have the Samsung Galaxy Tab 3 8.0 tablet that has the SM-T310 model number to use this guide. The CF-Auto-Root tool is usually made for one model number each and flashing the file on the wrong model number bricks the device almost always.

BEFORE WE BEGIN
Note that Chainfire was running the KOT49H.T310XXUBNH3 firmware build number on his Samsung Galaxy Tab 3 8.0 SM-T310 when he created the working rooting method in this guide. You do not have to be running on the same firmware build number as Chainfire was running. All you need is to be running on the Android 4.4.2 KitKat software updates and make sure you have the Samsung Galaxy Tab 3 8.0 that comes with the SM-T310 model number, and the guide works.
Unlock the Developer Options menu on the Samsung Galaxy Tab 3 8.0 if it is not unlocked already by tapping on the Menu > Settings > About Device > Build Number no less than seven times. You have tapped on the build number enough times when the Android software shows a new message n the display that says you are using the device as a developer.
Turn on the USB Debugging Mode from the Samsung Galaxy Tab 3 8.0’s Developer Options menu that you just unlocked by tapping on the Menu > Settings > Developer Options and then checking the box that is available for the USB Debugging Mode.
Install the Samsung USB Drivers on the Windows computer so the Samsung Galaxy Tab 3 8.0 can be detected by the Odin flashing tool.
Sometimes a new bootloader can be present in an Android software update. These are a lot more common when updating to newer versions of Android it should not be a problem here. Nonetheless, if a new bootloader does arrive, it can stop CF-Auto-Root from working until Chainfire updates the file. Before he knows when to update the file, he needs readers to leave the new recovery image found in the problematic firmware in a message on the CF-Auto-Root tool thread made over at the XDA-Developers website.

HOW TO ROOT SAMSUNG GALAXY TAB 3 8.0 SM-T310 RUNNING ON ANDROID 4.4.2 KITKAT SOFTWARE UPDATES
Download the CF-Auto-Root tool for the Samsung Galaxy Tab 3 8.0 SM-T310 running Android 4.4.2.
Extract the rooting file to the Downloads folder on the computer—where your downloaded file will appear by default after it has finished downloading.
Once extracted, the Odin flashing app and the CF-Auto-Root tool will be available in the Downloads folder. Double-click on the Odin flashing app file so the flashing tool opens.
Boot the Samsung Galaxy Tab 3 8.0 tablet into the download mode and then connect it to the computer with the USB cable.
Check to see that Odin is detecting the device by observing a blue or yellow color coming from the ID: COM port. (No color means you still need to get the Samsung USB Drivers working or that you are not logged into the computer as an administrator).
Click the AP button from the Odin app on the computer.
Browse through to the Downloads folder and select the Md5 file to upload to Odin.
Click the Start button from Odin and the rooting begins.
Wait until you get a green pass box appearing in Odin near the ID: COM port before unplugging from the computer.
In conclusion, that is how to root Samsung Galaxy Tab 3 8.0 SM-T310 running on the Android 4.4.2 KitKat software updates by using Chainfire’s CF-Auto-Root tool–one of the only one-click rooting solutions out there for Samsung devices. The SuperSU app is installed and enabled now, and you can see it in the app drawer when the tablet reboots back into the normal mode.