How to root Galaxy Note Pro 12.2 SM-P905M on Android 5.0.2 lollipop

How to root Galaxy Note Pro 12.2 SM-P905M on Android 5.0.2 lollipop

Hello Friends, Today i am going to tell you How to root Galaxy Note Pro 12.2 SM-P905M on Android 5.0.2 lollipop. This is the best way to root Galaxy Note Pro 12.2 SM-P905M on Android 5.0.2 lollipop. So you can check How to root Galaxy Note Pro 12.2 SM-P905M on Android 5.0.2 lollipop Below Here. How to root Samsung Galaxy Note Pro 12.2 SM-P900 Android Lollipop 5.0.2 with CF-Auto-Root using ODIN software. Read notes / Warning on the bottom of this post before perform rooting your Samsung Devices. CF-Auto-Root file consist of MD5 file and ODIN software. The zip file is not included TWRP Custom recovery.

Warning
Use at your own risk, I’m not responsible for bricking your device.
Make sure you get the correct file. Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, CF-Auto-Root will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, using CF-Auto-Root will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, using CF-Auto-Root will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data.

REQUIREMENTS
You need to have the Samsung Galaxy Note Pro 12.2 that comes with the SM-P905M model number to use this guide. The CF-Auto-Root files are made for each model number and flashing it on the wrong model number results in that device getting bricked almost always.
You must have a computer that is running a version of the Windows operating system to use this guide. The Odin flashing tool is what is required to be able to flash the CF-Auto-Root by Chainfire, and it only runs on Windows operating systems. People who cannot get a chance to sit in front of Windows and complete the guide can try running a Windows virtual machine environment from the Mac or Linux computer instead.

BEFORE WE BEGIN
Chainfire was running the LRX22G.P905MUBUABOJ1 on the Samsung Galaxy Note Pro 12.2 SM-P905M when he created the rooting method found in this guide. You do not have to be running in that same firmware build number as him to use this guide. The following guide works if you are running on the Android 5.0.2 Lollipop software update if you have the SM-P905M model number.
New Android versions can bring new bootloaders, and the new bootloaders can temporarily stop the CF-Auto-Root tool from working until Chainfire updates the guide. The only way he can keep track is if people leave a message on the CF-Auto-Root tool thread made at the XDA-Developers website that has the new recovery image found in the new firmware creating the problems.
Unlock the Developer Options menu on the Samsung Galaxy Note Pro 12.2 tablet by tapping on the Menu > Settings > About Device > Build Number seven times. Don’t stop tapping on the build number until the Android operating system brings up a new message on the display stating that you are now using the device as a developer.
Turn on the USB Debugging Mode on the Galaxy Note Pro 12.2 tablet from the Developer Options menu that you have just unlocked by tapping on the Menu > Settings > Developer Options > USB Debugging. Once you age checked the box that is available there for the USB Debugging Mode leave the Developer Options menu for Android to remember your settings automatically.
Install the Samsung USB Drivers on the Windows computer you are running Odin on so that the Samsung Galaxy Note Pro 12.2 SM-P905M tablet can connect to the computer and get detected by the Odin flashing tool which then allows for the flashing to work.

HOW TO ROOT SAMSUNG GALAXY NOTE PRO 12.2 SM-P905M RUNNING ON ANDROID 5.0.2 LOLLIPOP
Download the CF-Auto-Root tool for the Samsung Galaxy Note Pro 12.2 SM-P905M running on Android 5.0.2 Lollipop.
Open the Downloads folder and extract the rooting file to the Downloads folder so that the din flashing app and the CF-Auto-Root tool are now available from the Downloads folder.
Double-click on the Odin executable and the flashing tool user interface opens on the computer, and the flashing tool is ready for you to connect.
Boot the Samsung Galaxy Note Pro 12.2 SM-P905M into the download mode and connect it to the computer with the USB cable.
Look for a yellow or blue color coming from the ID: COM port which is there to let you know that the Galaxy Note Pro is connected and the USB Drivers are working.
Click the AP button from the Odin app on the computer and then browse through to the Downloads folder and choose to upload the MD5 file to Odin.
Select the start button from Odin on the computer and the rooting begins.
Wait until the Odin app on the PC gives a green box with a pass message inside of it before unplugging from the computer.
In conclusion, that is how to Samsung Galaxy Note Pro 12.2 SM-P905M tablets running on the Android 5.0.2 Lollipop software updates by using Chainfire’s one-click rooting tool he calls CF-Auto-Root. The tablet reboots now and the SuperSU is available from the app drawer—the app that CF-Auto-Root just finished installing and enabling on the Samsung Galaxy Note Pro for your rooting benefit. It means you can open the Google Play Store app now and install any of the apps that require root access to run such as the Folder Mount application.