How to Unbrick the Samsung Galaxy Note 7

How to Unbrick the Samsung Galaxy Note 7

Hello Friends, Today i am going to tell you How to Unbrick the Samsung Galaxy Note 7. This is the best way to Unbrick the Samsung Galaxy Note 7. So you can check How to Unbrick the Samsung Galaxy Note 7 Below Here. If you are a newbie at Android devices then you might have tried to root Galaxy Note 7, or install custom ROMs, Mods, kernels and so on. But, since you are in this guide there are chances that you have bricked your Samsung Galaxy Note 7 and now are interested to unbrick/unroot it. Also, this guide can be very helpful if your Samsung Galaxy Note 7 stuck in bootloop. If you have such problems then you can check the steps from below in order to solve these problems successfully.

Keep in mind: Installing stock firmware on Galaxy Note 7 you will wipe all your data, you can lose everything that’s saved on the internal storage memory of your Galaxy Note 7. That’s why, before flashing stock ROM Firmware on your phone you need to use backup and restore apps from Google Play for storing everything that’s important to you.

Also see:How to Install Samsung Galaxy S7 Stock Android 6.0.1 Marshmallow Ported ROM On Galaxy Note 3 Guide
 
Apart, in case you’re facing issues regarding performance, device keeps on getting off frequently, app crashes and some other issues, and you’ve already tried resets, then probably, downgrading to stock firmware is good to go.

Prerequisites
#Make sure to check your device model number before you proceed further. The guide is dedicated only for Samsung Galaxy Note 7 variants and it shouldn’t be used on any other handset.

To check the device’s model, you could visit the ‘About phone’ section or could see the outer box of the handset.

#Consequently, flashing stock firmware will remove anything which is being kept under the device’s memory such as apps, downloaded files, custom recovery, custom Rom, etc.,

You could follow our following guides to back up your phone:

Full Back up android 

Downloads
Download the stock firmware for Samsung Galaxy Note 7 based on it’s model number. To check the model number, go into settings, look for About phone and then look for model number.

Chinese Note 7 firmware (SM-N9300) 
N9300ZHU1APGI (Android 6.0.1 Marshmallow)
N9300ZCU1APGJ (Android 6.0.1 Marshmallow)

SPRINT NOTE 7 FIRMWARE (SM-N930P)
Download > N930PVPU1APGC

T-MOBILE NOTE 7 FIRMWARE (SM-N930T)
Download > N930TTMB1APGC

VERIZON NOTE 7 FIRMWARE (SM-N930V)
Download > N930VVRS1APH1

US CELLULAR NOTE 7 FIRMWARE (SM-N930R4)
Download > N930R4TYS1APH1

CANADIAN NOTE 7 FIRMWARE (SM-N930W8)
Download > N930W8VLU1APH1

GLOBAL NOTE 7 FIRMWARE (SM-N930F/G/H/I)
Download > N930FXXU1APG7
Download > N930FXXU1APGJ
Download > N930FXXU1APGK
Download > N930FXXU1APGI

KOREAN NOTE 7 FIRMWARE (SM-N930K/L/S)
Download > N930KKKU1BPHA
Download > N930SKSU1BPHA
Download > N930LKLU1BPHA

Note:-  Once you’ve downloaded the required firmware file, extract it to obtain .md5 file. We will use that file to proceed further.

⇒ Download the Odin flashing tool from → here. Extract it get Odin3 v3.09.exe named file. Odin helps to flash firmware files on most of Android phones.

⇒ In case you’ve not installed USB drivers, then download the Samsung’s USB drivers from →here.  The proper drivers help the device to connect to PC in absolute manner.

How to flash stock firmware on Samsung Galaxy Note 7 and unbrick it
Power off your phone.
Now boot into download mode- Press and hold ‘Volume Down, Home and Power buttons’ at same time and release them when you see Android Logo with warning!
Now press ‘Volume UP’ to get in to Download mode. (Download mode – it helps to flash firmware on most of the Samsung’s devices)
Now Over the PC, from the Odin folder, double-click on Odin3.0.9.exe file to run it. The program will run just like below:

Using USB cable, connect your phone to PC.
Look onto Odin program, the ID:Com section should turn to light blue or green that means that device has been connected properly.
Note: In case it does not turn to any of these colors, install drivers again and restart your PC. Again connect the phone.
Now under the Odin program, Select “AP” and then find and locate .md5 file from the extracted folder of firmware. Do not make any other changes.
Now, click on “Start” button to start the process.
As soon as the process gets completed, PASS! message will get displayed over the Odin screen and now you can disconnect the device.
Detach your phone from PC. Now it should restart and bring you to Android home screen. Enter your Google account details to get started with your Samsung Galaxy Note 7.

So in this manner, we can easily unbrick Galaxy Note 7 or any other Samsung device. 

Troubleshooting
In case you see your device is,stuck at Samsung’s logo after this process or you see unusual behavior , then follow the below steps to make it run/boot properly:

Turn off the device.
Press Volume Up, Home and Power buttons all together until you get into recovery mode.
Under recovery mode, perform following:
Wipe data/factory reset
Now press reboot system now.
Furthermore, if you still face any issue with this guide or your handset, feel free to make comment and we’ll surely help you with best efforts.

Hope you like my post. My website daily update. So bookmark my site and stay updated. You can also follow my page below here. And thanks for visit my site.

Follow us on FaceBook- Click Here

Follow us on Twitter- Click Here

Follow us on Pinterest- Click Here

Follow us on Tumblr- Click Here

Follow us on Google Plus- Click Here